First to be tested was the Audi RSQ8, which is powered by a 4.0-litre twin-turbo V8 said to produce 600hp and 800Nm of torque. 

Next up was the BMW X5 Competition, with its 4.4-litre twin-turbo V8 claimed to offer 625hp and 800Nm of torque. 

The third SUV they tested was the Porsche Cayenne Turbo GT. Using a very similar 4.0-litre twin-turbo V8 to the Audi, it’s claimed to kick out 640hp and 850Nm. 

Last but not least was the Lamborghini Urus Performante. Again using a version of the V8 found in the Audi and Porsche, it’s said to deliver 666hp and 850Nm. 

Will any cars outperform their claimed figures? Or even worse, will any underperform?! Watch the video to see for yourself!  

What are Vehicle Weighing Pads?

Vehicle Weighing Pads are a convenient solution for quickly and accurately calculating the loads on different types of vehicles, including lorries, vans, and HGVs. These pads are particularly useful for checking individual axles and ensuring that the total gross weight of the vehicle does not exceed the maximum limit. 

By using two weigh pads, an axle weighing system can be easily set up to provide precise load measurements with an accuracy of 0.5%. Knowing the weight of your vehicle is important for safe and legal travel on public roads, and our Dini Argeo and Intercomp vehicle weighing pads offer a simple and reliable method of doing so. 

The portability of these pads allows them to be easily transported from one site to another or stored away when not in use. Investing in weigh pads can help avoid costly fines for overloaded vehicles, which can sometimes exceed the cost of the pads themselves. 

If you have any inquiries about axle weighing scales, please feel free to contact us through our online chat or by phone, and our team of specialists will be happy to assist you. 

The post SUV Showdown: Carwow Tests the Weights of Audi, BMW, Porsche and Lamborghini appeared first on Weightru.

Each of these three supercars comes equipped with a different engine & power output. The Huracan STO is first up, and it arrives with a 5.2-litre naturally-aspirated V10 which can apparently produce 640hp. Following that they look at the Urus Performante, which is packing a 4-litre twin-turbo V8 that can pull 666hp. And then finally there’s the Aventador SVJ, packing a 6.5-litre V12 which can apparently put down 770hp.  

In addition to finding out what their power output figures are, Carwow put each car on the scales to find out how much they really weigh!  

How do you think this one will play out – will the cars be putting down what Lamborghini says they are? And will they be lighter or heavier than their claimed weight? Watch the video below to find out!  

Vehicle Weighing Pads are used to quickly and easily calculate loads on vehicles such as lorries, vans and HGVs. They are useful for checking individual axles and the total gross weight of the vehicle is not more than the maximum permitted. 

With the use of two weigh pads, it becomes easy to set up an axle weighing system that can provide you with the ability to check loads to an accuracy of 0.5%. It is important that operators of vehicles know the weights of their vehicles when travelling on the roads.  

Our vehicle weighing pads from Dini Argeo and Intercomp offer a simple and reliable method of accurately measuring the load on a truck, lorry or van. The portability of the models allows them to be taken from site to site or stored away easily. 

Fines for overloaded vehicles can often be greater than the cost of a new set of vehicle weighing pads. This makes weigh pads an important investment for checking loads on vehicles and ensuring compliance with the law prior to entering the public highway. 

If you have any axle weighing scale enquiries, please get in touch via our online chat or give us a call and one of our specialists will be happy to help.  

The post Weighing in on Lamborghinis: Carwow’s Test to See if Lamborghinis Live Up to Their Power and Weight Claims  appeared first on Weightru.

Vehicle weighing machines are an important part of many industries.

They are used to measure the weight of vehicles and cargo, which is essential for ensuring safety and compliance with regulations.

Weighing machines come in a variety of different types, each with its own advantages and disadvantages. In this blog post, we will discuss how to manage the cost of different kinds of weighing machines.

General Costs

Different types of weighing machines have different costs.

The most expensive type of machine is the static weighing machine, which can cost upwards of £75,000.

For most businesses, however, the cost of a static weighing machine is not feasible. So, the next most expensive type of machine is the dynamic weighing machine, which typically costs between £25,000 and £50,000.

These machines are more accurate than static machines and can be used for a variety of different applications.

The least expensive type of machine is the portable weighing machine, which typically costs between £15,000 and £25,000.

Portable machines are less accurate than other types of machines but are much easier to move and set up.

Managing the Cost

The cost of a vehicle weighing machine is a significant investment for most businesses. However, there are a few things that you can do to manage the cost of your machine.

First, you should consider how often you will need to use the machine. If you only need to use the machine occasionally, you may be able to save money by renting or leasing a machine instead of purchasing one.

Second, you should consider the accuracy of the machine. More accurate machines typically cost more than less accurate machines. However, if accuracy is important for your business, it may be worth investing in a more expensive machine.

Finally, you should consider the features and functions that you need in a vehicle weighing machine. You may be able to save money by choosing a less feature-rich model.

To learn more, get in touch with us today.

You may also like:

1. 3 Common Types of Vehicle Weighing Solutions
2. How do Weighing Scales Work?
3. A Complete Guide on Weighing a Lorry

The post How to Manage the Cost of Vehicle Weighing Machines appeared first on Weightru.

When it comes to weighing machines, there are two main types: Second hand and new.

Both have their own set of pros and cons, so it can be difficult to decide which one is right for you.

In this blog post, we will compare Second hand vs new vehicle weighing machines, so that you can make an informed decision about which type is best for your business.

Advantages of Second Hand Weighing Machines

Second hand weighing machines have a few advantages.

First, they are usually much cheaper than new machines.

Second, they often come with a warranty or guarantee, so you can be sure that they will work properly.

Finally, Second hand machines are often easier to find than new ones.

Disadvantages of Second Hand Weighing Machines

However, there are also some disadvantages to Second hand weighing machines.

First, they may not be as accurate as new machines.

Second, they may not last as long as new machines.

Finally, Second hand machines may not have all the features that you want or need.

Advantages of New Weighing Machines

New vehicle weighing machines also have some advantages.

First, they are generally more accurate than Second hand machines.

Second, they often come with more features and options.

Finally, they usually have a longer warranty or guarantee than Second hand machines.

Disadvantages of New Weighing Machines

However, there are also some disadvantages to new vehicle weighing machines.

First, they can be very expensive.

Second, they may not be as easy to find as Second hand machines.

Finally, you may not be able to get the same warranty or guarantee with a new machine that you would with a Second hand machine.

Concluding Remarks

So, which is better for you? Second hand or new vehicle weighing machines?

The answer depends on your needs and budget.

If accuracy is your top priority, then you should go with a new machine. However, if you are on a tight budget, then a Second hand machine may be the better option for you.

Whatever you decide, make sure to do your research so that you can make the best decision for your business.

To learn more, get in touch with us today.

You may also like:

1. A Complete Guide on Weighing a Lorry
2. Electric Vehicles: Is The Future Light?
3. Fines & Penalties for Overloading Vehicles – Preventative Solutions

The post Second Hand vs New Vehicle Weighing Machines: Which is Better for You? appeared first on Weightru.

If you are in the transportation industry, then you know that it is important to know how to weigh a truck. 

This is because there are regulations governing how much weight a truck can carry. 

And with the rise in the number of Weigh in Motion (WIM) Sensors and random checks, it is more important than ever to know the weight of your vehicles to avoid any big fines. 

In this guide, we will walk you through the process of weighing a truck, so that you can be sure to stay within the legal limits. 

Let’s get started!

How to Weigh a Truck?

A vehicle may be overloaded on any of its axles, its gross weight, or its trail weight, which are all considered separate offences. 

For instance, if a truck was overloaded on two axles and its gross weight, this would result in 3 separate fines. 

To ensure you don’t exceed this, weight limits are provided on the manufacturer’s plate on the vehicle – they are determined by the technical specification of the truck and the need to protect UK roads. 

Currently, there are only two ways to weigh a truck directly: weighbridges and axle weigh pads. 

However, weighing products before they are loaded is an alternative that extends the range to pallet truck scales, platform scales, and weigh beams/U-Frame scales.

Weighbridges

Weighbridges are used to calculate a vehicle’s load, which is measured by weighing the vehicle when empty and when full. 

This may be done with either your personal on-site weighbridge or one of the private weighbridges available throughout the country. 

Having a weighbridge on the site is one of the most straightforward methods to guarantee that you’re following legal requirements. 

You may avoid financial or legal penalties by weighing your vehicles before they depart the site. However, they aren’t the most popular solution because they cost around £16,000 and above. There’s also a second restriction: weighbridges need a lot of space, which isn’t always available.

Axle Weigh Pads

Axle Weigh Pads are used to compute individual axle weights and overall gross weight of a vehicle. 

And one of the benefits of them is that they are intended to be lightweight and portable. This means they may be taken with a truck and used throughout the trip, as needed. 

The cost of weighing your vehicle with an axle scale is significantly lower than installing a weighbridge, and they are in some ways more accurate; a weighbridge can only measure the overall weight of a truck, however, Axle Weigh Pads can calculate the total weight of each axle. 

This implies that they will also draw attention to uneven loading, which can help to minimise wear and tear on your trucks.

Weighing Goods Before Loading the Truck

Pallet Truck Scales

Pallet truck scales are a great choice for weighing your cargo before loading it onto a truck. 

Because it takes less time to weigh the load and pallet truck scales are far less expensive than both Axle Weigh Pads and Weighbridges, this helps to improve efficiency. 

However, you should keep in mind the weight of your truck when empty (the tare weight), as it’s not feasible to weigh the vehicle itself with these scales.

Platform Scales

While pallet truck scales are not as fast and flexible as platform scales, which allow you to weigh and move the items at the same time, they are typically more precise than pallet truck scales and, if needed, can measure up to a higher capacity. 

If you need to weigh palletised products and use a fork truck, consider a pit mounted platform scale, which only requires you to go over the scale to get a weight. However, in order to remove the fork truck from the scale’s reading, you’ll need to know its weight.

Weigh Beams and U-Frame Scales

Platform scales are popular, but they’re inconvenient to move and difficult to store. 

Weigh Beams and U frame scales are a portable alternative that may be taken to the item to weigh it instead of vice versa. When not in use, Weigh Beams and U frames can be stored away.

The Bottom Line

Overloaded trucks will contribute to a wide range of concerns. 

Trucks that are heavier than the standard limit increase the risk of accidents (as they are more unstable, need a longer stopping time, over-speeding when driving downhill etc.), accelerate the deterioration of roads and infrastructure, and create uneven comparisons between transportation modes and operators.

Not to mention, overloading is breaking the law!

Please contact us today to find out more.

In the meantime, check our full range of vehicle weighing solutions here.

You may also like:

1. How to Weigh a Caravan: The Ultimate Guide
2. 3 Common Types of Vehicle Weighing Solutions
3. Our Top 4 Benefits of Axle Weigh Pads

The post How to Weigh a Truck? appeared first on Weightru.

Load cells are sensors that are used to measure weight or force. 

They are commonly found in industrial and manufacturing settings, but they can also be used in a variety of other applications. 

In this comprehensive guide, we will discuss the different types of load cells, how they work, and some of the common applications for them. 

What Are Load Cells?

Most industrial weighing equipment contain load cells, which are essential components. 

The most basic definition of a load cell is that it measures weight – or, more accurately, directional force – by means of a combination of springs and strain gauges converted into an electrical output.

Depending on the intended application and environment, load cells come in a variety of forms and standards. 

Some types, however, require calibrated proving rings to determine load displacement – although this is less common. Strain gauge load cells are widely used in the weighing sector, with the exception of certain laboratories where precise mechanical balances are still utilised.

Among the many sorts of load cells available, distinct types and designs can be distinguished in two key ways:

• By the specific technique they use to detect weight (compression load cells, tension load cells, and other measurement types)
• By the type of output signal generated (hydraulic load cells, piezoelectric load cells and other various configurations)

It should be stated that, in a strict sense, any true load cell will always be designed to operate (and should therefore be aligned) in the direction of gravity. 

However, the term “load cell” is frequently used to refer to a wide range of force-sensing device kinds, many of which are specifically designed to detect forces applied from all directions.

Many workplaces nowadays have a similar meaning for these phrases, so it’s good to be precise about the sort of device you’ll be using for your intended application when calculating load cell prices or planning to purchase load cell components.

How Do Load Cells Work?

Spring elements attached to strain gauge materials (usually foil meshes or semiconductors) are most often made of steel or aluminium, resulting in a strain gauge that is both extremely durable and somewhat elastic. 

Deformation will occur to some extent under enough pressure, whether it is down force from above (compression) or a pulling force from below (tension), before returning to their original form and shape. The strain gauges can precisely measure the degree of this deformation in the spring components. 

In a typical load cell, it’s this micro deformation analysis that is transformed into an extremely precise weight reading using electronic means. In this way, directional pressure affects a load cell transducer and generates an electrical signal that is proportional to the measured force. 

Because they are sensitive to changes in temperature and humidity, load cells may be affected by a variety of external factors that must be adequately controlled, monitored, and adjusted. 

Overall temperatures, for example, might influence the structure (and therefore electrical resistance) of any material, as well as a wide range of other environmental issues such as bad weather, dampness and dust ingress, and changes in ambient conditions between sites.

Types of Load Cells

In the UK and the rest of the world, there are several load cell types and configurations available for industrial, manufacturing, and household usage. 

In this section, we will give a brief outline of each of these types and what sorts of applications they might be best suited to.

Compression Load Cells

A compression load cell measures downward or lateral “pushing” forces only, much like a traditional weighing machine. They are also known as “column load cells,” “pancake load cells,” or “donut load cells.” 

They’re often equipped with an integrated button design, making them a lightweight and efficient type of load cell for use in tight spaces. They’re especially prevalent at silo and boat weighing stations in industrial settings.

Tension Load Cells

A tension load cell is a type of strain gauge that measures forces that “pull” on it – usually from below – in the same way as a hanging digital scale at a grocery store fresh produce aisle. 

Tension load cell transducers (also known as tensile load cells, tension links, or load links) are frequently used on an industrial scale for weighing vessels and suspended hoppers, material research and testing, laboratory environment general force measurement applications, and in aerospace process monitoring.

Hydraulic Load Cells

Hydraulic load cells incorporate a diaphragm attached to the piston that measures displacement under force. The tube of filling fluid is compressed or expanded as pressure rises or falls, which is then detected and converted by the load cell into a readout. 

Hydraulic pressure load cells are frequently used in riskier, more environmentally harsh, or difficult-to-reach places because of their greater robustness compared to the delicate electrical circuitry of many other load cell types. 

That said, they are typically used in simple industrial and agricultural weighing applications, where common environmental challenges include moisture, dirt or chemical exposure.

Micro Load Cells

Due to its compact nature, micro load cells usually rely on semiconductors, rather than foil strain gauges to sense and measure deformation. 

They’re available in a number of configurations and styles, including both compression and tension varieties, and they may be used in a wide range of settings as bigger versions (as long as they can tolerate enough pressure). 

Miniature or micro load cells are frequently used in cases where space is limited. They generally provide extremely accurate and precise readings ranging from 10 g to 2000 pounds, depending on the brand and model. 

When shopping for micro load cells, it’s important to note that the majority of micro versions are restricted to measuring force from a single direction, so it’s vital to understand any “parasitic forces” (i.e., forces being applied from another direction) that may jeopardise the measurement’s accuracy or usefulness.

Piezoelectric Load Cells

In the case of dynamic loading, less sturdy strain gauge-type load cells can fail as a result of repeated application of sufficiently high dynamic load cycles. 

Essentially, piezoelectric load cells function on similar principles to conventional strain gauge load cells – that is, they use the basic principles of deformation. 

However rather than strain gauge foils, piezo cells are constructed of a different sort of transducer material. This material is able to transform the readings of dynamic and frequent force applied on it into an electrical output based on changes in resistance across the material. 

Compared to regular load cells, piezoelectric sensors can’t be used for taking static measurements of weight or strain, because these create a fixed amount of charge on the material. 

As a result, the voltage output does not change under static load, but some piezoelectric applications can be adapted with accessories like charge amplifiers to provide quasi-static measurements in the right conditions.

The Takeaway

An often overlooked but crucially important component, load cells are used in almost every modern industrial, manufacturing, weight-based sales or quality assurance environment you could name. 

Today’s markets offer a wide range of configurations, brands, and load cell transducer types, and some understanding of what they are and how they function is necessary when selecting the best product type for your intended application.

To find out more, please get in touch today.

In the meantime, take a look at our Vehicle Weighing Solutions here.

You may also like:

1. Balances vs. Scales: What’s the Difference?
2. Weighing Scales: A History of Innovation
3. How do Weighing Scales Work?

The post How Do Load Cells Work? A Comprehensive Guide appeared first on Weightru.

When you are towing a caravan, it is important to make sure that the weight is evenly distributed. 

This will help to prevent any accidents and keep you and your passengers safe while on the road. 

In this blog post, we will discuss how to weigh a caravan and find the right balance for your vehicle.

What is Towing Capacity?

Before you learn how to weigh a caravan, you need to know what number will tell you that you’re overweight. 

Simply, towing capacity is the maximum weight a car can tow legally. 

But even then, it might not be safe or pleasant to do so, especially with a caravan or trailer with a boxy profile. 

Often, the towing capacity will be found in your car’s handbook. If it’s not there, don’t worry you can easily work it out yourself too! 

However what you should know is: the maximum width for any towing vehicle is 2.55m and the maximum length, 7m for a trailer towed by a vehicle weighing up to 3,500kg. 

How to Load a Caravan

If you’re not sure how much weight your luggage will add to your touring caravan, the safest guideline is to avoid exceeding the maximum weight limitations on the side of caution. 

It’s not just the weight of the caravan that matters when it comes to safe and stable towing; it’s also how that weight is distributed; manufacturers recommend placing heavy items at the bottom, near the axle. 

Heavy items distributed throughout the caravan might affect its stability, especially in strong winds and on rough roads. The top regions of the caravan should be used to store lighter objects.

Weighing a Caravan

With towing capacity covered, let’s look at 2 ways you can use to determine the weight of your caravan. 

1. Local Weighbridge

The easiest way is to find a local weighbridge near you, and call ahead to check they can accept you. 

Then simply tow your caravan to the weighbridge, with all its usual contents that you would travel with. 

Once you’re there, you’ll be asked to drive onto the weighbridge plates, and you’ll want to make sure that all of your wheels and the jockey wheel are on the plate – unhitch, and drive off. 

Then, the operator will take the reading, give you a printout, hitch up again and be on your way in no time! 

As long as you are within your towing capacity, you don’t need to do anything. However, if you are over then you’ll need to remove some items to lighten the load. For instance, clothes, food, camping chairs etc., can be placed in the towing vehicle instead.

2. Portable Weigh Pads

The second option to consider is a portable weigh scale, where you simply put it on the ground and drive over it with each wheel of the caravan. 

Then, the portable weigh pads store that data until you have measured each wheel of the caravan to get a total weight figure. 

Plus, it’s a great way to display the weight for the left side of the caravan and compare it to the right so you can then redistribute the weight inside accordingly. 

As we mentioned earlier, for a pleasant on-road performance, you want the weight to be evenly distributed. 

For accurate readings at home, drive onto the portable scale slow and steady, and it’s absolutely vital that you take the reading on a flat and level surface. 

For more information, please get in touch today.

In the meantime, take a look at our Portable Weigh Pads here.

You may also like:

1. 3 Common Types of Vehicle Weighing Solutions
2. Our Top 4 Benefits of Axle Weigh Pads
3. Choosing the right portable axle weigh pad solution

The post How to Weigh a Caravan: The Ultimate Guide appeared first on Weightru.

With a large number of different vehicles operating both on a consumer and commercial capacity, there cannot be a one size fits all solution.

And so, there is a wide range of different vehicle weighing scales and indicators available which can give a variety of different results.

It may sound obvious, but it’s paramount to check your vehicle’s weight to reduce any potential risks posed to the public when traveling.

Not only this, but if a vehicle exceeds its maximum weight limits, this can result in financial penalties and fines; 15% or more will incur a cost of £300 and anything over 30% will result in a court hearing.

Plus, if a vehicle is overloaded, it will inevitably require more fuel to complete long distance journeys.

And so, weighing the vehicle correctly will ensure you minimise associated fuel costs and therefore increase your business’s profitability.

With that said, here are 3 of the most common types of vehicle weighing solutions.

1. Weighbridges

Essentially, weighbridges are large platforms where different vehicles can drive onto the deck and park up to be weighed.

For commercial operations, these are the ideal solution for weighing large industrial vehicles, like delivery trucks and lorries, because of their robust design.

Plus, there are different options to choose from: between pit and surface mounted, depending on your needs, requirements and preference.

Typically, weighbridges are installed where the net weight of a vehicle is used to determine the price of a product, applicable tax and other financial metrics.

In addition, there are optional driver-operated features that can be added where measurements can be taken without the need for remote access, which helps to lower the time taken to weigh each vehicle.

2. Axle Weigh Pads

As the name suggests, axle weigh pads are designed to record the weight imposed on each of the vehicle’s axles, or the total gross weight of a vehicle.

Typically, axle weigh pads are used in pairs: one pad for the left-hand wheels and the one for the right-hand side.

By using these, you can determine whether or not there are any balancing issues that need to be amended.

Consequently, poorly balanced axle weights can result in serious problems for the vehicles in both safety and adherence to road legislations.

For instance, a vehicle that is overloaded on a particular axle can make it very difficult to manoeuvre and lead to serious accidents or fatalities.

3. Vehicle Weight Indicators

Although weight indicators do not measure the weight of the vehicle itself, they are still an extremely important piece of equipment.

Simply, weight indicators are used to display the data obtained by your scales clearly, on a special high-resolution screen; many can be operated by touch.

And, high end weight indicators have the ability to connect to multiple load cells at the same time, which can present a number as high as 16.

However, this is not just a simple display unit.

Rather, these screens can be customised to provide bespoke readings, which is the perfect solution for advanced applications where multiple sets of data are required during a single operation.

Moreover, weight indicators today can be easily integrated with many different software packages, which makes the overall process for weighing, reporting and data analysis much more efficient.

The Takeaway

Hopefully, now you have a better idea of the different vehicle weight checking solutions, so you can pick the right one for your business.

Ultimately, weighing vehicles is important to avoid fines and penalties, as well as keeping everyone on the road safe.

Want to know more? Please contact us today.

In the meantime, take a look at our Vehicle Weight Checker solutions here.

You may also like:

1. Types of Vehicle Weighing Equipment: Current Use & Advancements
2. Our Top 4 Benefits of Axle Weigh Pads
3. Choosing the Right Axle Weighing Solution for your Business

The post 3 Common Types of Vehicle Weighing Solutions appeared first on Weightru.

Axle weigh pads are robust, durable scales used to weigh vehicles.

So if you’re in an industry that requires you to record your vehicle’s weight for safety and legal reasons, these are perfect for you.

From cars to vans, lorries and HGVs, these are a cheap and easy solution to monitor your vehicle’s weight wherever you go.

Simply, place them on the ground, drive on to them and take your reading.

The best thing about them is that they’re portable. They’re small and compact enough to take with you in your truck, which means you no longer have to install a weighbridge at every location. Instead, you can simply place your portable axle weigh pads on the floor and weigh your vehicle with ease.

But, the ease of use is not the only benefit to axle weigh pads, here are 4 more…

1. Protects Everyone

A vehicle that’s too heavy can cause an imbalance when driving, making it difficult to steer and stay in control.

In extreme circumstances, the uneven weight distribution makes the vehicle more likely to crash. For instance, if the vehicle is top heavy and the wheels lift, it can lean sideways and in particularly windy situations, make it land on its side, which can be fatal for the driver and others who are around.

In addition, heavy loads make the vehicles stop time longer, so in the event where you need to emergency stop, such as if another driver or civilian moves into your lane.

Hence why it is critical to regularly check your vehicle’s weight to keep everyone on the roads safe.

2. Prevent Damage to your Vehicle

Overloading and going over your vehicle’s weight limit can cause some damage to the vehicle itself.

Whilst many of the components within industrial vehicles are incredibly durable, they have maximum thresholds that need to be adhered to.

If not, you’ll be putting axles, drive shafts and your tyres at risk and can cause complications in the future, which can require more maintenance and replacements of specific components: meaning it could cost more than driving an additional trip.

As such, carrying axle weigh pads with you to keep an eye on its weight will prevent those xtra red flags popping up during your next MOT.

3. Prevent Damage to Roads

An overly heavy vehicle is one of the main reasons why roads get damaged.

Consequently, overloading vehicles can cause potholes, general surface deterioration and edge failure – roads are designed with pressure tolerance considered so vehicles exceeding maximum weight limits will inevitably destroy them.

With that in mind, axle weigh pads are a must have to ensure your vehicle is weight compliant and prevent taxpayers money being spent on annoying road maintenance.

4. Avoid Penalties

Going over your vehicle’s maximum weight is a punishable offence.

And depending on your circumstance, it can cost you hefty penalties you and your business could probably do without.

To quickly remind you, the fines if you’re overweight by % are:

• 5 – 10% = £100
• 10 – 15% = £200
• 15 – 20% = £300
• 30% or more = court summons

Not only are these limits placed to regulate the weight of commercial vehicles, but to keep the roads and everyone else safe too.

So, being compliant with weight weight restrictions is paramount, otherwise risk being stopped by the police or the Driver and Vehicle Standards Agency (DVSA).

Final Words

All in all, axle weigh pads prevent a lot of potentially dangerous situations; everyone on the road deserves to be safe.

Plus, if you check your vehicle’s weight limits and are compliant, you can be sure not to rack up any unnecessary fines.

Want to know more? Get in touch today.

Check our Vehicle Weight Checker solutions in the meantime.

You may also like:

1. 5 Benefits of Modular Weighbridges
2. Choosing the Right Axle Weighing Solution for your Business
3. Choosing the Right Portable Axle Weigh Pad Solution

The post Our Top 4 Benefits of Axle Weigh Pads appeared first on Weightru.